Seven Pines Home Improvement
Seven Pines Home Improvement provides backsplash installation in Shrewsbury and across MetroWest, typically ranging from $1,500 to $4,500 and completed in one to four days depending on wall size and tile. We cover wall measurement, substrate prep, tile setting, grouting and sealing, outlet extension, and full cleanup. Marcony Araujo and Romero Araujo back every install with a 3-year workmanship warranty and hold HIC #205267.
A backsplash is the tiled wall between your countertop and cabinets that keeps water and grease off the drywall and finishes the kitchen. Shrewsbury's median home was built in 1979, and a lot of Northside and Dean Park kitchens still carry their original 70s and 80s tile. Replacing it is one of the highest-impact changes you can make without touching the layout or the cabinets.
This page covers what the work includes, what it costs, the tile materials we install, how the job runs from measurement to final caulk, and how long it takes.
Backsplash Installation
Backsplash installation is one of the most visible and most practical upgrades a Shrewsbury homeowner can make to a kitchen. It covers everything from a standard countertop-to-cabinet tile run to a full-height slab behind the range, protecting drywall from moisture and grease while finishing the room.
Shrewsbury's housing stock tells the story. The median home here was built in 1979, and a lot of Northside and Dean Park kitchens still carry their original tile from the 1970s and 1980s. Grout has stained past cleaning, field tile has dated the room, and in many cases a recent counter swap left raw wall exposed behind the new surface. These are not cosmetic complaints; they are kitchens that need real work.
Seven Pines Home Improvement holds HIC #205267 and manages every phase of the project, from in-home measurement and material selection through substrate prep, tile setting, grouting, sealing, and final cleanup. Interior tile installation does not require a building permit under 780 CMR, but any electrical work beyond extending existing outlet boxes requires a licensed electrician, and we address that in scope discussions before work begins.
Backsplash Services
A backsplash installation from Seven Pines covers wall measurement, substrate prep, tile cutting and setting, grouting and sealing, outlet extension, and cleanup. It does not include rewiring, countertop changes, or cabinet removal unless those are written into the scope. Below are the specific services and material types we install across Shrewsbury and MetroWest.
Standard Backsplash
A standard backsplash runs from the countertop surface up to the bottom of the wall cabinets, typically 15 to 18 inches of wall. This is the most common scope in Shrewsbury kitchens and covers substrate prep, tile setting in thin-set or mastic, grouting, sealing, and outlet cover reinstallation. It protects drywall from moisture and grease while visually completing the kitchen.
Full-Height Backsplash
A full-height backsplash runs from the countertop all the way to the ceiling, eliminating the painted wall strip and giving the kitchen a stronger visual presence. This scope works well in open-concept layouts and taller kitchens where the added wall area would otherwise feel unfinished. Complex or large-format patterns in this range typically take two to four days to complete.
Range Accent Wall
An accent wall behind the range or hood uses a contrasting tile, pattern, or material to anchor the cooking zone and draw the eye. This approach is often used when homeowners want a design statement without retiling the entire kitchen. Installation is coordinated with the range hood position, outlet placement, and any Schluter edge profiles needed to finish exposed tile edges.
Learn about our kitchen remodeling services
Ceramic and Porcelain
Ceramic subway tile and porcelain, including large-format slabs, are the most common backsplash materials we install. Ceramic is affordable and easy to maintain. Porcelain is denser, harder, and holds up better behind a range. Both are set in thin-set mortar over cement board or moisture-resistant drywall and sourced through Daltile, Marazzi, MSI, and Floor and Decor.
Natural Stone
We install marble, granite, travertine, and slate backsplash tile for homeowners who want a material with natural variation and depth. Stone is porous and requires sealing before and after grouting, a step that ceramic does not need. The added prep and sealing are included in every natural stone backsplash we install.
Glass and Mosaic
Glass tile and mosaic sheets reflect light and add color depth that solid tile does not. They require a white or near-white thin-set to avoid color bleed-through, and cuts need a wet saw with a glass-rated blade. Mosaic sheets are mesh-mounted and set as a unit, keeping pattern alignment consistent across the wall. We source glass and mosaic tile through Arizona Tile, MSI, and local distributors.
Metal and Specialty
Stainless steel tile, metal mosaic, and cement or encaustic tile each install differently and serve distinct design directions. Metal tile suits modern and industrial kitchens and wipes clean easily. Cement and encaustic tile bring pattern and texture but require sealing and careful grout choice to avoid staining the face. We assess substrate and grout compatibility for every specialty material before the tile is ordered.
Compare Your Options
The right service depends on how much wall you need covered, what is behind the existing tile, and how much the design needs to do. Use this table as a starting point, then reach out and we will confirm after seeing the space.
Swipe sideways to view the full comparison table.
| Option | Best for | Local fit | Typical range (2026) | Learn more |
|---|---|---|---|---|
| Standard Countertop-to-Cabinet Backsplash | Most kitchens; protects wall between counter and upper cabinets | Strong fit for Shrewsbury homes where dated or stained original tile needs replacing | $1,500 to $4,500 | Backsplash Installation in Shrewsbury |
| Full-Height Backsplash | Countertop-to-ceiling coverage; bold visual statement | Suits MetroWest kitchens with tall upper cabinets or open shelving where full coverage is desired | Upper end of $1,500 to $4,500 | Backsplash Installation in Shrewsbury |
| Range Accent or Feature Wall | Focal point behind range or hood; statement tile or pattern | Good fit for Shrewsbury Colonials and ranches with a dedicated cooking alcove or hood | Lower to mid range of $1,500 to $4,500 depending on tile | Kitchen Remodeler in Shrewsbury |
| Peel-and-Stick or Panel Backsplash | Budget updates or rental properties; no demolition needed | Practical option for MetroWest rental units or kitchens not yet ready for a full tile install | Lower end of $1,500 to $4,500 | Backsplash Installation in Shrewsbury |
| Natural Stone Backsplash | Marble, granite, travertine, or slate for a premium finish | Popular in Shrewsbury and Northborough homes where countertop and backsplash materials are coordinated | Upper end of $1,500 to $4,500 | Backsplash Installation in Shrewsbury |
| Glass and Mosaic Backsplash | Reflective finish; mosaic sheets for pattern or color | Works well in smaller MetroWest kitchens where light and visual depth are a priority | Mid to upper range of $1,500 to $4,500 | Backsplash Installation in Shrewsbury |
| Full Kitchen Remodel | Backsplash is one part of a broader layout and surface overhaul | Older Worcester County homes where the entire kitchen needs updating, not just the wall tile | $30,000 to $100,000 | Kitchen Remodeling in Shrewsbury |
Project Consultation
Backsplash installation in Shrewsbury and the wider MetroWest area runs $1,500 to $4,500 in 2026 from Seven Pines Home Improvement. A standard kitchen backsplash of 20 to 40 square feet usually lands in the middle of that range. The price is driven by the tile you choose, the square footage, the number of outlet and switch cutouts, and whether an existing backsplash has to come off first. A reliable figure can only be prepared after the wall area and the intended scope have been assessed in person.
On-site measurement before every written estimate
| Scope | Typical Range (2026) | What moves the price |
|---|---|---|
| Small Accent Area (10-20 sq ft) | $1,500 to $2,200 | Tile material, number of outlet cutouts, whether old tile must come off first |
| Standard Kitchen Backsplash (20-40 sq ft) | $2,200 to $3,500 | Tile format (subway vs. mosaic vs. large-format), square footage, outlet and switch count |
| Full-Height Backsplash (countertop to ceiling) | $3,000 to $4,500 | Wall height, pattern complexity, backer board requirement, number of seams and edge trim pieces |
| Range or Hood Accent Wall | $1,800 to $3,500 | Tile type (natural stone, glass, metal), wall prep, grout and sealing requirements |
| Complex Pattern (herringbone, natural stone, 40+ sq ft) | $3,200 to $4,500 | Pattern layout time, stone sealing, cut waste, drywall repair if old backsplash is removed |
| Old Backsplash Removal and Replacement | $2,500 to $4,500 | Removal labor, substrate condition behind old tile, drywall or backer board repair before setting begins |
| Peel-and-Stick or Panel Backsplash | $1,500 to $2,500 | Panel material, wall prep, square footage, outlet and edge trim finishing |
| Backsplash Installation (overall range) | $1,500 to $4,500 | Tile format and material, square footage, number of outlet and switch cutouts, and whether an existing backsplash has to come off first |
Every project is quoted after an on-site visit, contact us to schedule yours.
OUR PROCESS
Seven Pines Home Improvement runs every backsplash installation in Shrewsbury through a defined sequence. Each homeowner receives a dedicated point of contact, a written itemized estimate before work begins, and direct communication at every phase of the project.
We visit the kitchen, measure the wall area, assess the existing substrate, and review tile options, patterns, and grout colors with you before any material is ordered or a start date is set.
Any existing backsplash is removed and the wall behind it is inspected. We install cement board or moisture-resistant drywall as needed to give the new tile a clean, flat, and structurally sound substrate before setting begins.
We dry-fit the tile to plan cuts and center the pattern, then cut precisely around outlets, windows, and edges. Tile is set in thin-set mortar or mastic with spacers to keep grout lines consistent at 1/16 to 1/8 inch, with full mortar coverage behind each piece.
After the thin-set cures, we grout, clean the haze, and seal the grout and any natural stone. Outlet boxes are extended and GFCI-compliant covers reinstalled. Caulk, not grout, is applied at the countertop seam and inside corners so those joints stay flexible and watertight over time.
PERMITS & COMPLIANCE
Interior finish work including tile installation is listed by the Town of Shrewsbury's Building Inspector's Office as work that does not require a permit under 780 CMR, the Massachusetts State Building Code. If your project involves electrical rewiring beyond extending existing outlet boxes, a licensed electrician working under the correct permit is required, and we address that in scope discussions before work begins.
Setting, grouting, and sealing backsplash tile is classified as interior finish work under 780 CMR and does not require a building permit from the Town of Shrewsbury.
Extending existing outlet and switch boxes to meet the new tile surface is part of our standard scope. No separate electrical permit is required for this work when no rewiring is involved.
If the project requires new circuits, new outlet locations, or any rewiring beyond extending existing boxes, a licensed electrician must perform that work under the applicable electrical permit.
Seven Pines holds HIC #205267 and discusses electrical scope at the in-home measurement visit so that any permit requirements are identified and coordinated before installation day.
COST GUIDE
Backsplash installation in Shrewsbury and the wider MetroWest area runs $1,500 to $4,500 in 2026 from Seven Pines Home Improvement. A standard kitchen backsplash of 20 to 40 square feet usually lands in the middle of that range. The price is driven mostly by the tile you choose and whether an old backsplash has to come off first.
Small mosaics, large-format porcelain, and natural stone each cut and set differently. Stone also requires sealing that ceramic does not, which adds time and material cost.
More wall means more tile, more cuts, and more labor hours. A small accent area of 10 to 20 square feet sits at the lower end of the range, while full-height or complex installations of 40 or more square feet reach the upper end.
Every electrical box on the wall requires a set of precise tile cuts. A backsplash wall with six outlets takes noticeably longer to set than one with two, and each cutout is factored into the estimate.
Pulling old tile and repairing drywall or backer board behind it adds a prep day before setting can begin. We assess the substrate during the in-home measurement visit and include removal cost in writing before work starts.
Service Area
Seven Pines Home Improvement provides backsplash installation primarily across Shrewsbury and Worcester County, including Northborough, Grafton, Millis, and surrounding towns. We also work in MetroWest communities such as Sherborn, Dover, Concord, Needham, and Newton. Our base is on the Northside of Shrewsbury, near Rice Avenue, which keeps the team close to Worcester County project sites. For other locations, call (857) 247-4667 to confirm current service availability.
Before & After
Old stained tile removed down to the substrate, then rebuilt with fresh backer board, new subway tile set in thin-set, and finished with sealed grout and caulked seams.
Helpful Information
We handle wall measurement, substrate prep and backer board installation, tile cutting and setting, grouting and sealing, outlet and switch extension, cover reinstallation, and full cleanup. Work outside that scope includes countertop modification, cabinet removal, and any rewiring beyond extending existing boxes, which requires a licensed electrician. Contact us to Get a Quote for your kitchen.
We install ceramic subway tile, porcelain including large-format slabs, natural stone such as marble, granite, travertine and slate, glass tile and mosaic sheets, stainless steel and metal tile, and cement or encaustic tile. Materials are sourced through suppliers including Daltile, MSI, Marazzi, Arizona Tile, and Floor and Decor, matched to budget and kitchen design before any tile is ordered.
We install standard countertop-to-cabinet backsplashes, full-height backsplashes running countertop to ceiling, accent and feature walls behind a range or hood, and peel-and-stick or panel backsplashes suited to budget updates or rental properties. The right format depends on wall area, cabinetry height, and how much visual weight the design needs to carry.
Grout is rigid and cracks when two surfaces move independently, which countertops and tile walls do with seasonal temperature shifts. We use caulk at inside corners and the countertop seam because it stays flexible and maintains a watertight seal over time. This follows standard tile industry practice and is part of every backsplash installation we complete.
Interior finish work including tile installation is listed by the Town of Shrewsbury's Building Inspector's Office as work that does not require a permit under 780 CMR, the Massachusetts State Building Code. If your project involves electrical rewiring beyond extending existing outlet boxes, a licensed electrician working under the correct permit is required, and we address that in scope discussions before work begins.
We stand behind our workmanship with a 3-year warranty. If an issue is caused by our work, we'll return promptly to inspect it and make it right at no additional cost during the warranty period. That covers tile setting, grouting, backer board installation, and all finishing work included in the original scope.
Old tile removal is one of the four main variables that move the price and add time to the schedule. Removal can expose damaged drywall or an inadequate substrate requiring repair before new tile can be set. Extensive drywall repair behind the wall falls outside standard scope unless written into the estimate, which we provide in detail before any work starts.
We ask that countertops be cleared and items stored away from the work area before installation day. If an existing backsplash is coming down, wall surfaces behind it may need repair, and we assess that during the in-home measurement visit. Having your tile selection finalized before the start date keeps the project on schedule and avoids delays waiting for material delivery.
Schedule Your Backsplash Project
If you are still picking tile or figuring out whether your substrate needs work, that is exactly the right time to reach out. We will come to the property, look at the actual wall, and give you a written estimate covering material, labor, and removal if needed, no obligation, no pressure. Seven Pines Home Improvement has been installing backsplashes across Shrewsbury and MetroWest since 2016, and we are registered under HIC #205267. Marcony Araujo and Romero Araujo are available to answer questions about tile selection, scope, and timeline before you commit to anything. You can read more about how we work on our about page.
Our Shrewsbury Base
Seven Pines Home Improvement is based at 14 Rice Avenue in Shrewsbury and provides hardwood floor repair across Worcester County and the wider MetroWest area.
Our crew travels to hardwood floor repair projects throughout Shrewsbury, Worcester County, and surrounding MetroWest communities including Northborough, Marlborough, Grafton, and Hopkinton.
We are on the north side of Shrewsbury, just past Dean Park heading toward the Northborough line. Rice Avenue, not Rice Street.
Customer Reviews
Seven Pines holds a 5.0-star rating on Google across 9 reviews from homeowners in Shrewsbury and surrounding MetroWest communities.
9
Google
reviews
Seven Pines repaired several damaged boards near our kitchen after a slow dishwasher leak. Marcony and the crew matched the stain on our 1980s oak floor better than I expected. You can barely see where the new boards are.
We had a section of hallway floor that was cupping and squeaking after a pipe issue. Seven Pines checked the subfloor, replaced the bad boards, and blended the finish into the rest of the floor. Professional and finished ahead of schedule.
Romero and the team replaced gouged boards in our living room and matched the stain on our aged maple floor. They were on time, thorough with the moisture check, and left the space cleaner than they found it.
