Completed siding installation on a Colonial Revival home in Shrewsbury, MA
Fully weatherproofed vinyl siding
Built for MetroWest freeze-thaw cycles

Seven Pines Home Improvement

Vinyl siding installation for MetroWest homes

Seven Pines Home Improvement installs vinyl siding on single-family homes across MetroWest, MA, including full tear-offs, overlays, and new construction runs, priced at $7 to $14 per square foot installed in 2026 and completed in 3 to 5 days for most homes.

Most of the housing stock across Shrewsbury, Northborough, and the surrounding MetroWest towns was built between the 1970s and 1990s. That original siding is now 30 to 50 years old, cracking, fading, and in many cases letting moisture into the sheathing underneath. New vinyl siding gives those homes a fully weatherproofed, low-maintenance exterior that holds color and sheds water without paint.

Marcony Araujo and Romero Araujo have been installing siding in Shrewsbury and surrounding Worcester County communities since 2016, registered under HIC #205267. This page covers what the installation includes, what it costs, how we do it step by step, and how to judge whether any crew did the job correctly.

Rated 5 stars across 10 Google reviews. 3-year workmanship warranty. Free estimates for MetroWest homeowners.

Low-maintenance exterior craftsmanship built for Central Massachusetts winters

Licensed HIC #205267
Workmanship 3-Year Workmanship Warranty
Project Planning Free Estimates
Local Experience Serving Shrewsbury Since 2016

Exterior Protection

Vinyl Siding Installation in MetroWest, MA

Vinyl siding installation covers the full exterior envelope: the panels, the moisture barrier behind them, the trim at every edge, and the flashing at every penetration. Most of the housing stock across Shrewsbury, Northborough, and the surrounding MetroWest towns was built between the 1970s and 1990s. That original siding is now 30 to 50 years old, and at that age you are not choosing between replacement and waiting. You are choosing between planned replacement and emergency sheathing repair after water gets behind the wall.

Siding inspection on a residential home in Shrewsbury, MA
Vinyl siding installation for New England conditions

The specific challenge in MetroWest is the thermal cycle. Worcester County averages around 64 inches of snow annually, with January lows that regularly drop below 20 degrees F. That expansion and contraction works fasteners loose, opens seams, and cracks older materials at the joints. Vinyl siding installed correctly, with nails left loose in the nail slot and panels able to slide with temperature swings, handles that movement without buckling or splitting. The work we do addresses the whole system: new panels, house wrap, trim, flashing, and cleanup.

Seven Pines Home Improvement handles vinyl siding projects on Cape Cods, Colonial Revivals, raised ranches, and the oversized detached garages common to this part of Worcester County. If you are managing a property in Shrewsbury, Northborough, Grafton, or anywhere else in our service area, we quote after assessing the property. Scope and material condition drive the price, and we confirm the figure after measuring the home.

Vinyl Siding Services

Vinyl Siding Services We Offer in MetroWest

From full tear-off and re-side to insulated panel upgrades, overlay installs, and new construction runs, Seven Pines handles every type of vinyl siding project across Shrewsbury, Northborough, and the surrounding MetroWest towns.

Siding installation in Shrewsbury Full Tear-Off and Re-Side

Full Tear-Off and Re-Side

A complete tear-off removes all existing cladding back to the sheathing, allowing a full inspection of the wall before new panels go up. It is the right scope when the original siding has aged past patchwork, when the sheathing needs assessment, or when a homeowner is upgrading from aluminum or wood to vinyl. Most 1,500 to 2,500 square foot MetroWest homes are completed in 3 to 5 days.

Siding repair in Shrewsbury New Construction Install

New Construction Siding Install

New construction siding runs begin after the sheathing and house wrap are in place, working directly with the framing crew and general contractor's schedule. The wall is clean and plumb, which speeds the job and allows clean trim integration at every window, door, and roofline. We coordinate directly with the build schedule to keep the exterior closed on time.

Vinyl siding installation in Shrewsbury Overlay Install

Re-Side Over Existing Siding

When the existing siding is structurally sound and the wall can absorb the added thickness at windows and doors without issue, installing new vinyl panels over the old material is a viable option. It avoids tear-off labor and disposal costs. We assess wall thickness tolerance and sheathing condition before recommending an overlay, because not every home qualifies and doing it wrong creates moisture problems.

Cedar shake siding in Shrewsbury Insulated Vinyl

Insulated Vinyl Siding Upgrade

Insulated vinyl panels have a layer of contoured foam bonded to the back of the panel that fills the gap between the siding and the wall, reducing thermal bridging and adding rigidity. Lines like the Alside Prodigy and Charter Oak series are common choices for MetroWest homeowners looking to improve energy performance alongside curb appeal. Insulated panels also produce a noticeably solid feel when you press on the wall.

Fiber cement siding in Shrewsbury Fiber Cement

Fiber Cement Siding Installation

For homeowners who want a product that handles freeze-thaw cycling and moisture better than standard vinyl, fiber cement is the next step up. It resists cracking in cold temperatures, holds paint longer than wood-based products, and works well on homes where the architectural detail calls for a clapboard or shingle appearance that reads as more traditional. We install and quote fiber cement alongside vinyl so homeowners can compare both paths.

Storm damage siding repair in Shrewsbury Storm Restoration

Storm Damage Vinyl Siding Repair

Wind and ice events across MetroWest blow panels loose, crack corners, and force water behind the nail hem on the side of the house that takes the brunt. We assess the full extent of storm damage before quoting, because what is visible at the surface, a cracked panel or a missing section, often conceals wet sheathing or failed flashing underneath that has to be addressed before new panels go on.

Exterior trim replacement in Shrewsbury Exterior Trim

Trim, Soffit, and Fascia Work

Corner posts, J-channel, window and door casing, soffit panels, and fascia boards are what hold the vinyl siding system together at every edge and transition. Trim rot is one of the most common findings on MetroWest homes that have had water intrusion from ice dams or failed flashing at the roofline. We replace and integrate trim as part of a full siding project or as standalone work when the panels themselves are still sound.

Compare Your Options

Which Vinyl Siding Approach Is Right for Your MetroWest Home?

The right service depends on your existing wall condition, how much of the exterior needs attention, and the performance level you want. Here is how the main options compare for homes across Shrewsbury and the surrounding MetroWest towns.

Swipe sideways to view the full comparison table.

Option Best for Holds up to MetroWest winters Learn more
Full Tear-Off and Re-Side Homes where existing siding is cracked, faded, or allowing moisture into the sheathing Excellent when paired with fresh house wrap and proper flashing at all transitions Siding Contractor
Overlay Installation Re-side over existing siding where wall structure qualifies and window and door tolerances allow Good, provided the existing wall is dry and the overlay does not trap moisture at transitions Overlay Installation
Insulated Vinyl Siding Homeowners upgrading thermal performance on 1970s to 1990s homes with minimal wall insulation Excellent, the foam backer reduces thermal bridging and keeps panel profiles straighter in extreme cold Fiber Cement Siding
New Construction Siding Install Additions, garages, or new builds where no old material needs removal Good, fastest path to a weatherproofed envelope on new framing New Construction Install
Cedar Shake Siding High-end natural finish on Colonial or craftsman-style homes where vinyl is not the preferred look Good with proper installation and maintenance; requires more upkeep than vinyl Cedar Shake Siding
Siding Repair Localized panel damage where the surrounding material is still sound Extends life of an existing system when damage is caught early and matched correctly Siding Repair
Exterior Trim Replacement Rotted fascia, corner boards, or window and door casing alongside a siding project Good, trim rot from ice-dam water intrusion is common in this housing stock Exterior Trim Replacement

2026 Project Pricing

How Much Does Vinyl Siding Installation Cost in MetroWest, MA?

Vinyl siding installation in MetroWest runs $7 to $14 per square foot installed in 2026, including labor and materials. Price moves with home size and stories, panel grade and thickness, existing siding removal, sheathing condition, and trim complexity at dormers or bay windows. Every project is quoted after an on-site assessment, contact us to schedule yours.

Seven Pines contractor measuring a home and reviewing siding material options in Shrewsbury, MA On-site assessment before every written estimate

Swipe sideways to view the full pricing table.

Service Typical range in MetroWest (2026) What moves the price
Full Tear-Off and Re-Side $10,500 to $25,000 Home size and stories, sheathing condition, panel grade, trim complexity
Small Single-Story or Addition $7,000 to $12,000 Linear footage, panel profile, existing material removal
Insulated Vinyl Siding Upgrade $12,000 to $28,000 Insulated panel cost premium, home size, wall prep requirements
Overlay Install Over Existing Siding $8,000 to $18,000 Wall thickness tolerance at windows and doors, furring requirements
New Construction Siding Install $7,000 to $20,000 Structure size, panel grade, soffit and fascia scope
Premium Panel Upgrade (.046 to .052 inch) $13,000 to $30,000 Panel thickness, profile selection, trim detail at dormers and gables
Two-Story Architecturally Complex Home $18,000 to $35,000 Scaffold or lift access, dormer and bay window trim, sheathing prep scope

Range reflects all vinyl siding installation services offered across MetroWest. Individual project quotes are issued after on-site assessment and wall measurement.

Contractor inspecting damaged sheathing, housewrap, window flashing and an exterior penetration before siding installation

Hiring Guide

What to Look for in a Vinyl Siding Contractor

The right vinyl siding proposal should explain what gets removed, what goes behind the new panels, which credentials apply, and how every trim transition and penetration is handled. These four details reveal whether an estimate covers the full exterior system or only the visible field panels.

A Written Scope That Names What Gets Removed

Before any vinyl panel goes up, a contractor should specify in writing what comes off: existing siding, old felt or house wrap, and any damaged sheathing. On 1970s and 1980s MetroWest homes, rotted OSB or board sheathing is common and often invisible until the old siding is stripped. A scope that skips this step leaves the homeowner absorbing the cost of surprises once the wall is open mid-project.

House Wrap and Flashing Specified Before Pricing

A properly installed water-resistive barrier and step flashing at every window and door opening is what separates vinyl siding that lasts from siding that traps moisture behind it. Ask to see these called out in the written estimate. House wrap should lap shingle-style from bottom to top, and flashing must be integrated at every penetration and transition. A price that omits these items is not a lower price, it is a deferred failure.

A Valid HIC License for Massachusetts Work

Massachusetts requires a Home Improvement Contractor registration for any contractor doing exterior work on a residential property. The license number should appear on the written contract, state law requires it. Seven Pines carries HIC registration number 205267, on file with the state as required. Verify any contractor's number at the state's consumer affairs portal before signing a contract.

Trim and Penetration Detail in the Proposal

Vinyl siding fails most often at transitions: around windows, at corner posts, where the wall meets the foundation, and at every penetration such as electrical outlets, hose bibs, and vents. An estimate that addresses the field panels and ignores J-channel, utility trim, and penetration flashing is incomplete. Ask specifically how each transition is handled and what material covers it. That is where the installer's experience shows.

Seven Pines siding service van outside a Cape Cod home in Shrewsbury, MA

Service Area

Where we install vinyl siding across MetroWest

Seven Pines Home Improvement is based in Shrewsbury and installs vinyl siding throughout Worcester County and the MetroWest corridor. In the Worcester County area we regularly work in Shrewsbury, Northborough, and Grafton. Across MetroWest we serve Newton, Needham, Natick, Concord, Dover, Weston, Hopkinton, Holliston, Millis, Medfield, and Marlborough, communities where older housing stock and local permitting requirements call for the same careful approach on every job. If you are outside these areas, call (857) 247-4667 and we will tell you directly whether we can help.

Helpful Information

Vinyl Siding Installation Questions

What does vinyl siding installation in Shrewsbury include?

We cover tear-off and haul-away of the old siding, house wrap, J-channel, trim, new panels, fasteners, and basic flashing at windows and doors. Structural sheathing replacement, window or door work, gutters, and trim painting fall outside standard scope and are quoted separately if needed. Contact us to Get a Quote for your property in Shrewsbury.

How much does vinyl siding installation cost in MetroWest, MA?

Vinyl siding installation in the MetroWest market runs $7 to $14 per square foot installed. Price moves with home size and stories, removal and disposal of existing siding, sheathing condition, panel grade and thickness, trim complexity at dormers or bay windows, insulated versus standard panels, and site accessibility. We confirm the figure after measuring the property.

Which vinyl siding products and panel grades do you install?

We install panels from CertainTeed Monogram and Cedar Impressions, Mastic Ovation and Structure, Royal Celect, and Alside Charter Oak and Prodigy insulated lines. Thickness runs from builder-grade .040-inch through premium .046- to .052-inch stock. Thicker panels hold their profile better on walls with minor irregularities and produce a tighter, more consistent reveal line.

What quality standards govern how vinyl siding panels are fastened?

Installation follows ASTM D4756 and the Vinyl Siding Institute installation manual. We drive corrosion-resistant nails with a minimum one-inch penetration into sheathing or studs and leave each nail slightly loose in the nail slot so panels can expand and contract with MetroWest temperature swings. The starter strip is set level within one-eighth of an inch over ten feet, and flashing is integrated at every penetration and transition.

Does a vinyl siding project in Shrewsbury require a building permit?

The Town of Shrewsbury Building Inspector's Office administers permits under 780 CMR, the Massachusetts State Building Code, and applications are submitted through the town's online permitting system. We handle the permit process as part of the project, and our registration is on file with the state under MA HIC 205267 as required for licensed home improvement work.

What are the four types of vinyl siding projects you handle?

We take on full tear-off and re-side jobs, new construction siding installs, re-side-over-existing overlay projects where the wall structure qualifies, and insulated vinyl siding upgrades. The right approach depends on sheathing condition, wall thickness tolerance at windows and doors, and the performance level the homeowner wants. Get a Quote to find out which path fits your home.

What trade terms will I hear during a vinyl siding project?

Expect J-channel, the trim piece framing window and door edges; starter strip, the base course setting the angle for every panel above; nail hem or nail slot, where fasteners attach; house wrap, the water-resistive barrier behind the siding; and double-4 or double-5 profile, which describes the width of each exposed panel face. We walk through all of it before work begins.

What workmanship coverage applies after the siding is installed?

We stand behind our workmanship with a 3-year warranty. If an issue is caused by our work, we'll return promptly to inspect it and make it right at no additional cost during the warranty period. The warranty covers the installation itself; manufacturer defects in the panel material are handled through the product warranty that comes with the specific line installed.

Start a Conversation

Ready to Talk Through Your Vinyl Siding Project?

If you are still comparing panel grades or figuring out whether your sheathing needs work before new siding goes up, that is exactly the right time to reach out. We will schedule a free estimate, walk the property, and give you a written scope and price before any decision is made. Seven Pines Home Improvement has been doing this work in Shrewsbury and across MetroWest since 2016, registered under HIC #205267. No pressure, just a clear picture of what the project involves and what it will cost.

Our Shrewsbury Base

Areas we install herringbone and pattern floors across MetroWest

Seven Pines Home Improvement is based at 14 Rice Avenue in Shrewsbury and installs herringbone and pattern wood floors across Worcester County and MetroWest, from Shrewsbury and Worcester out to Natick, Newton, Needham, Weston, Concord and Holliston.

Seven Pines Home Improvement
14 Rice Avenue
Shrewsbury, MA 01545
(857) 247-4667
office@sevenpinescorp.com
Business Hours
Monday to Friday8 am, 6 pm
Saturday8 am, 6 pm
SundayClosed
Serving Worcester County and MetroWest

Our herringbone and pattern floor installation crew works out of Shrewsbury and reaches most of our service area within a 40 minute drive, from Worcester, Northborough, and Grafton to the towns along Route 9 and Route 495.

We are based in Shrewsbury at 14 Rice Avenue, on the north side of town near the Northborough line. Most of the homes where we install herringbone and pattern wood floors sit inside a 40 minute drive of the shop, which is what makes it practical to return for a punch list item or a warranty call after a pattern floor project is complete.

Customer Reviews

What MetroWest Homeowners Say

Seven Pines holds a 5.0-star rating on Google across 10 reviews from homeowners in Shrewsbury and surrounding Massachusetts communities.

After water damage, Seven Pines rebuilt and painted the affected areas with impressive attention to detail. Marcony, Romero and the crew were professional, punctual and respectful of the home, taking care of small details without needing to be asked.

Ping H.
via Google

Seven Pines completed the original house project along with several additional requests. The team delivered great work and completed everything in about half the originally estimated time.

Kristofer P.
via Google

Marcony and the Seven Pines team delivered excellent results on a herringbone floor installation project. They were precise with every cut, arrived on time, and the finished pattern is exactly what we envisioned for our entryway.

Gautham P.
via Google