Seven Pines Home Improvement
Seven Pines Home Improvement provides exterior trim replacement in Shrewsbury and the surrounding MetroWest communities, covering fascia boards, soffits, corner boards, window and door casing, frieze boards, rake boards, historic profile replication, and substrate repair behind deteriorated trim.
Exterior trim is the first place moisture finds an entry point into a wall assembly, and Central Massachusetts winters accelerate that process. Repeated freeze-thaw cycles split painted wood, force water behind casing, and soften sheathing before the damage is visible from the ground. By the time rot shows on the surface, it has typically traveled further than the board itself. Every project begins with a thorough probe of the surrounding substrate so hidden damage is found and addressed before new material goes on.
Marcony Araujo and Romero Araujo have completed exterior trim replacement work across Shrewsbury and Worcester County since 2016, registered under HIC #205267.
This page covers Seven Pines Home Improvement's full range of exterior trim replacement services, from targeted spot repairs to whole-house trim packages paired with re-siding projects.
Exterior craftsmanship built for Central Massachusetts
Exterior Protection
Exterior trim is the first line of defense between your wall assembly and New England weather. Fascia boards, soffits, corner boards, window and door casing, frieze boards, and rake boards all work together to seal the gap where cladding, roofing, and framing meet. When that trim softens, cracks, or pulls away from the wall, water follows the path in. Most of Shrewsbury's single-family housing stock was built between 1970 and 1999, putting the original trim at four to five decades old and well past the point where maintenance alone keeps water out.
Worcester County averages around 64 inches of snow annually, with January lows that regularly drop below 20 degrees F. That thermal cycle works moisture into wood trim, expands it, and contracts it until fasteners loosen and joints open. Ice dams loading up behind gutters add steady freeze pressure against fascia and soffit boards. The result is rot that starts at the surface and travels into sheathing before most homeowners notice anything from the ground.
Seven Pines Home Improvement replaces exterior trim on Cape Cods, Colonial Revivals, raised ranches, and the larger detached garages common across this part of Worcester County. If you are managing a property in Shrewsbury, Northborough, Grafton, or anywhere else in our service area, we assess the property first and scope the work from what we find in the field.
Exterior Trim Services
Explore full board replacement, spot rot repairs, historic profile replication, whole-house trim packages paired with re-siding, and flashing work for homes throughout Shrewsbury and MetroWest.
Fascia and Soffit
Fascia and soffit sit directly behind and beneath the gutters, making them the first trim elements to absorb water from overflowing or poorly sealed gutters. When fascia softens, the gutter loses its anchor. We detach gutters, remove deteriorated boards back to sound wood, inspect the rafter tails behind them, install new material with corrosion-resistant fasteners, and rehang gutters before we leave the site.
Corner and Frieze
Corner boards seal the vertical transitions where two siding planes meet, and frieze boards run horizontally at the top of the wall beneath the roofline. Both are common rot locations on older Shrewsbury colonials and capes. We replace deteriorated sections back to sound substrate, back-prime all cut ends, and seal every joint with exterior-grade caulk before finish is applied.
Window and Door Casing
Window and door casing frames every opening in the exterior wall and is responsible for shedding water away from the rough opening behind it. Failed casing caulk or missing drip cap flashing allows moisture to migrate into the wall assembly. We remove damaged casing, verify and repair the moisture barrier behind it, install drip cap where it is absent, and fit new casing that matches the home's existing profile.
Rake Board
Rake boards run along the sloped edge of a gable end and take direct exposure to wind-driven rain. On steeply pitched roofs common in MetroWest's older neighborhoods, rake boards are frequently the first trim element to show moisture damage. Replacing them involves working at elevation with proper staging, installing new material tight to the roof sheathing, and ensuring the connection at the fascia is flashed and sealed.
Historic Profiles
Older homes in Shrewsbury's Dean Park area and along Lake Quinsigamond carry trim profiles that standard lumber yards no longer stock. When a direct replacement is unavailable off the shelf, we replicate the profile using cellular PVC or finger-jointed pine milled to match the original dimensions. The result preserves the home's architectural character while upgrading to a more durable material.
Spot Rot Repair
When rot is confined to a small area of an otherwise sound board, a targeted splice back to solid wood can extend the life of the surrounding trim without full replacement. We probe every affected run before recommending this scope. If moisture has traveled into the sheathing, or if more than roughly a third of a board is soft, we recommend full board replacement and explain both options in writing before any work begins.
Full-House Package
Pairing a full trim replacement with a re-siding project is the most efficient way to address the entire exterior envelope at once. With siding removed, we have full access to sheathing, framing, and every trim connection, so substrate repairs are made before new material covers them. The result is a fully weather-tight exterior with no deferred maintenance hidden behind new cladding.
Compare Your Options
The right scope depends on how much trim is failing, how deep the moisture damage goes, and whether the work is paired with a re-side or stands alone. Here is how the options compare for homes across MetroWest and Worcester County.
Swipe sideways to view the full comparison table.
| Option | Best for | Holds up to MetroWest freeze-thaw cycles | Learn more |
|---|---|---|---|
| Spot Rot Repair | Isolated soft sections where surrounding boards are still sound | Effective when rot is caught early and substrate is dry before closing up | Exterior Trim Replacement |
| Full Board Replacement by Elevation | One or two sides of the house with significant rot or impact damage | Good, especially when cellular PVC or fiber cement replaces original wood | Exterior Trim Replacement |
| Whole-House Trim Replacement | Aged housing stock where rot has spread across multiple elevations | Excellent when paired with proper flashing and moisture-resistant material | Exterior Trim Replacement |
| Trim Replacement Paired with Re-Siding | Full exterior refresh on 1970s and 1980s homes with failing siding and trim together | Excellent, envelope is addressed as a system rather than piecemeal | Siding Contractor |
| Historic Profile Replication | Older Shrewsbury colonials and waterfront homes needing non-stock trim profiles | Good, depends on material selected for the custom profile | Exterior Trim Replacement |
| Storm Damage Trim Repair | Wind, ice, or impact damage to fascia, rake boards, or casing after a weather event | Restores envelope integrity; substrate must be assessed before new material is fastened | Storm Damage Siding Repair |
| Fiber Cement Trim Upgrade | Low-maintenance durability upgrade on homes that cycle through painted wood every few years | Excellent, resists freeze-thaw cracking and does not absorb moisture | Fiber Cement Siding |
2026 Project Pricing
Cost is driven by total linear footage, trim profile and material selected, the depth of rot into the sheathing or framing behind each board, and access requirements such as roof pitch or staging. Every project is quoted after an on-site assessment, contact us to schedule yours.
On-site assessment before every written estimate
Swipe sideways to view the full pricing table.
| Service | Typical range in Shrewsbury (2026) | What moves the price |
|---|---|---|
| Spot Trim Repair (single section) | $500 to $2,500 | Linear footage affected, rot depth into sheathing, material choice |
| Single-Elevation Trim Replacement | $1,500 to $6,000 | Number of board types, trim profile, access and staging requirements |
| Whole-House Trim Replacement | $6,000 to $20,000 | Total linear footage, material selected, substrate repair scope |
| Fascia and Soffit Replacement | $2,500 to $10,000 | Linear footage, gutter detachment and rehang, rot into rafter tails |
| Window and Door Casing Replacement | $1,000 to $5,000 | Number of openings, trim profile complexity, flashing scope |
| Historic Profile Replication | $3,000 to $15,000 | Custom milling requirements, material grade, extent of matching runs |
| Trim Replacement Paired with Re-Siding | $8,000 to $25,000 | Combined scope, substrate repairs uncovered during siding removal |
Range reflects all exterior trim replacement services offered. Individual project quotes are issued after on-site assessment.
Hiring Guide
A solid trim proposal should name every board being replaced, specify the material and fastening method, call out flashing at every roof-wall and window intersection, and explain what happens if moisture has reached the sheathing behind the trim. These four details separate a complete estimate from one that prices only the visible boards and ignores the system behind them.
Fascia, soffit, corner boards, frieze boards, rake boards, and window and door casing are separate components with separate failure modes. A contractor's written scope should name each one, note its current condition, and state what triggers replacement versus repair. A proposal that refers only to "trim work" without itemizing the elements leaves room for disagreement once the old material comes off and hidden rot is exposed.
Drip cap flashing above window and door casings, and kickout flashing at every roof-wall intersection, are not optional additions. Without them, water follows the trim back into the wall assembly and the replacement boards rot from behind within a few seasons. Ask to see flashing called out in the written estimate. A price that omits it is not a competitive bid, it is a deferred failure built into the scope from day one.
Massachusetts requires a Home Improvement Contractor (HIC) registration for any contractor performing exterior work on a residential property. The registration number must appear on the written contract under state law, and it carries legal accountability that unregistered contractors cannot offer. Verify the number at the state's consumer affairs portal before you sign. This step takes two minutes and eliminates a significant category of risk.
Cellular PVC, fiber cement, cedar, and primed finger-jointed pine all behave differently under MetroWest freeze-thaw cycles, and each requires a specific fastening and finishing approach. A complete proposal states the material, the fastener type, and whether all field cuts and end grains will be back-primed before installation. Back-priming is where most exterior trim failures begin; if it is not mentioned in writing, ask why.
Service Area
Seven Pines Home Improvement is based in Shrewsbury, up past Dean Park toward the Northborough line, and handles exterior trim replacement across Worcester County, including Northborough, Grafton, Millis, and surrounding communities. We also work throughout the MetroWest corridor: Newton, Needham, Dover, Weston, Concord, and Acton, where older housing stock and historic trim profiles call for the same careful, detail-driven approach we use in Shrewsbury. If you are outside these areas, call (857) 247-4667 and we will tell you directly whether we can help.
Helpful Information
When rot is confined to a small area, a targeted splice back to sound wood can work. We probe every affected run first; if moisture has traveled into the sheathing, or if more than roughly a third of a board is soft, full board replacement is the more durable choice. A detailed written estimate covers both options so you can decide.
Exterior trim replacement covers the full envelope of trim components: fascia boards, soffits, corner boards, frieze boards, rake boards, and window and door casing. We inspect and probe each element for moisture damage before removal, and any rot found in adjoining sheathing is addressed before new material is fastened.
Included: removal and disposal of old trim, substrate inspection, new material and corrosion-resistant fasteners, flashing and sealant at every joint, and basic prep for paint. Excluded: a full house repaint, structural framing repairs beyond the trim zone, and window or door unit replacement itself, though gutters are temporarily detached and rehung as needed.
We verify that all rotted wood is excavated back to sound substrate, that moisture content in adjoining framing reads below roughly 19 percent, and that drip cap and kickout flashing meet local building code at every roof-wall intersection. All joints are back-primed and sealed with exterior-grade caulk before the finish coat or factory finish is applied.
Cellular PVC trim, available in profiles from manufacturers such as AZEK, Royal, and Versatex, does not absorb moisture and resists the repeated freeze-thaw expansion that splits wood over time in MetroWest winters. Fiber cement trim from James Hardie is similarly stable and paintable. Primed finger-jointed pine and cedar remain options where budget or historic profile matching drives the choice, with the trade-off of more maintenance.
Homes in Shrewsbury's older subdivisions, including the grand colonials near Dean Park and waterfront properties along Lake Quinsigamond in Edgemere, often have trim profiles no longer stocked at standard lumber yards. We offer historic profile replication when needed, and our substrate inspection surfaces any moisture damage to sheathing or framing before it becomes an unplanned line item.
Shrewsbury's Building Inspector's Office administers permits under 780 CMR, the Massachusetts State Building Code, using an online submission system. Whether a trim replacement project triggers a permit depends on scope and code thresholds. We identify the permitting requirement during the estimate phase so the correct documents are in place before work begins.
We stand behind our workmanship with a 3-year warranty. If an issue is caused by our work, we'll return promptly to inspect it and make it right at no additional cost during the warranty period. The warranty applies to the installation itself, including flashing, fastening, and sealant work, on every exterior trim replacement project we complete.
Start a Conversation
If you have noticed soft spots, peeling paint, or visible rot along your fascia, corner boards, or window casing, now is the right time to reach out. We will schedule a free estimate, walk the full exterior, and probe every affected run before putting a written scope in front of you. Seven Pines Home Improvement has been serving Shrewsbury and the surrounding MetroWest communities since 2016, registered under HIC #205267. No pressure, just a clear picture of what the project involves and what it will cost.
Our Shrewsbury Base
Seven Pines Home Improvement is based at 14 Rice Avenue in Shrewsbury and installs herringbone and pattern wood floors across Worcester County and MetroWest, from Shrewsbury and Worcester out to Natick, Newton, Needham, Weston, Concord and Holliston.
Our herringbone and pattern floor installation crew works out of Shrewsbury and reaches most of our service area within a 40 minute drive, from Worcester, Northborough, and Grafton to the towns along Route 9 and Route 495.
We are based in Shrewsbury at 14 Rice Avenue, on the north side of town near the Northborough line. Most of the homes where we install herringbone and pattern wood floors sit inside a 40 minute drive of the shop, which is what makes it practical to return for a punch list item or a warranty call after a pattern floor project is complete.
Customer Reviews
Seven Pines holds a 5.0-star rating on Google across 10 reviews from homeowners in Shrewsbury and surrounding Massachusetts communities.
After water damage, Seven Pines rebuilt and painted the affected areas with impressive attention to detail. Marcony, Romero and the crew were professional, punctual and respectful of the home, taking care of small details without needing to be asked.
Seven Pines completed the original house project along with several additional requests. The team delivered great work and completed everything in about half the originally estimated time.
Marcony and the Seven Pines team delivered excellent results on a herringbone floor installation project. They were precise with every cut, arrived on time, and the finished pattern is exactly what we envisioned for our entryway.
