Seven Pines Home Improvement
Seven Pines Home Improvement installs kitchen cabinets in Shrewsbury, MA, and across MetroWest, handling everything from demo and stud mapping through leveling, scribing, and final door-reveal adjustment. Jobs range from $150 to $380 per linear foot installed in 2026, and most kitchens are completed in two to five days on site. Marcony Araujo and Romero Araujo lead every project with detailed written estimates and clear communication from first visit to final walkthrough.
Most of the kitchens we work in across Shrewsbury and the surrounding Worcester County towns were designed in the 1970s and 1980s. The box construction is failing, hinges have played out, and layouts built for a different era no longer serve how families cook today. This page covers what cabinet installation includes, how stock, semi-custom, and full custom grades compare, how the installation sequence runs from stud mapping to final reveal, and what the work costs in this market.
Seven Pines holds a 5-star rating across Google reviews and carries HIC #205267. Every installation is backed by a 3-year workmanship warranty.
Kitchen Cabinet Installation
Kitchen cabinet installation covers the full scope from demolition and stud mapping through leveling, scribing, and final door-reveal adjustment. It is one of the most technically demanding phases of a kitchen remodel, and the quality of the installation determines how the finished kitchen looks and holds up for decades.
Most of the kitchens we work in across Shrewsbury were built between 1970 and 1999, when the town was growing rapidly and galley and peninsula layouts were the standard. Those cabinet boxes are now 40 to 50 years old. The carcasses are failing, the hinges have played out, and layouts designed for a different era create real bottlenecks in a modern household. This is not a discretionary upgrade market; it is a market of cabinets that have simply run their course.
Cabinet installation work in Shrewsbury runs from $150 to $380 per linear foot installed in 2026. The cabinet grade, stock, semi-custom, or full custom, is the single largest driver of where a project lands in that range. Most kitchens in the 20-to-30 linear foot range are completed in three to five days on site, with semi-custom and custom orders adding four to ten weeks of manufacturer lead time before installation begins.
Cabinet Installation Services
Kitchen cabinet installation is not just setting boxes on a wall. It is a sequence of connected tasks, from demolition and stud mapping through leveling, scribing, and final door-reveal adjustment, that determines whether a finished kitchen holds up for decades. Explore the scopes Seven Pines provides across Shrewsbury and MetroWest.
Demo and Removal
The job starts with careful removal of existing cabinets so walls, studs, and utilities are fully accessible. We inspect what is behind the old work, including stud locations, plumbing and electrical rough-ins, wall plumb, and floor level, before any new cabinet goes in. Removal and disposal of existing cabinets is included in our installation scope.
Stud Mapping and Layout
Every installation begins with stud mapping and laser-level layout lines that establish exactly where each cabinet will land before a single fastener goes in. Upper cabinets are hung first on a temporary ledger board anchored to studs, holding each box at height while it is shimmed to within one-eighth of an inch over the run.
Cabinet Refacing
When the existing cabinet carcasses are structurally sound but the doors and drawer fronts are dated, refacing is a practical alternative to full replacement. We replace doors, drawer fronts, and visible surfaces while keeping the existing box structure intact, delivering an updated look at a narrower scope and lower cost than a full cabinet installation.
Kitchen Cabinet Refacing in Shrewsbury
Base Cabinets and Scribing
Base cabinets are set and shimmed level front-to-back and side-to-side before anchoring. Gaps where walls are out of plumb are closed with scribe molding and filler strips fitted to the actual wall surface, not caulked over. Toe kicks are installed after the base run is secured, completing the finished base cabinet line ready for countertop installation.
Door and Drawer Adjustment
Every door and drawer is adjusted for consistent reveals, the uniform gap visible between doors and the face frame, before the job is complete. Soft-close hinges and drawer slides are tuned so they operate correctly from the first day of use. Even reveals and properly functioning hardware are not finishing touches, they are part of what a correct installation means.
Full Kitchen Remodeling
Cabinet installation is often the centerpiece of a broader kitchen remodel that includes countertops, backsplash, flooring, and lighting. Seven Pines coordinates the full scope so each trade is sequenced correctly and no work has to be redone to accommodate what follows. A complete kitchen remodel is the right scope when the layout itself no longer works.
Full Kitchen Remodeling in Shrewsbury
Stock, Semi-Custom, and Full Custom
We install stock lines such as Hampton Bay and KraftMaid, semi-custom brands including Schrock, Bertch, KitchenCraft, and Wellborn, and full custom lines such as Plain and Fancy or Crystal Cabinets. For box construction, we recommend plywood over particleboard wherever the budget allows, because plywood holds fasteners better and resists moisture in a MetroWest kitchen environment.
Compare Your Options
The right service depends on what is actually failing in your kitchen, the cabinet boxes, the layout, the surfaces, or all three. Use this table as a starting point, then reach out and we will clarify after seeing the space.
Swipe sideways to view the full comparison table.
| Option | Best for | Local fit | Typical range (2026) | Learn more |
|---|---|---|---|---|
| Kitchen Cabinet Installation | Structurally failed, water-damaged, or missing cabinets; layout keeper or full replacement | Older Shrewsbury and MetroWest homes with 40- to 50-year-old boxes that have reached end of life | $150 to $380 per linear foot installed | Cabinet Installation in Shrewsbury |
| Kitchen Cabinet Refacing | Sound cabinet carcasses with dated doors, drawer fronts, and face frames | Solid 1980s-era box frames that do not need replacement, only a new face | $8,000 to $20,000 | Cabinet Refacing in Shrewsbury |
| Kitchen Remodeling | Outdated layout, structural changes, full kitchen upgrade including cabinets and more | Strong fit for 1970s and 1980s Shrewsbury homes with cramped galley plans | $30,000 to $100,000 | Kitchen Remodeling in Shrewsbury |
| Countertop Installation | Damaged or outdated surfaces after new cabinets are set; cabinet layout retained | Works across all Shrewsbury home types; weight and support vary by material | $3,500 to $12,000 | Countertop Installation in Shrewsbury |
| Open Concept Kitchen | Wall removal to connect kitchen and living areas before new cabinet layout is set | Many 1970s and 1980s Shrewsbury homes have non-load-bearing partition walls; confirm before ordering cabinets | $45,000 to $120,000 | Open Concept Kitchen in Shrewsbury |
| Backsplash Installation | Finishing the kitchen after new cabinets and countertops are in place | Recommended as a follow-on step once cabinet and countertop installation is complete | $800 to $3,500 | Backsplash Installation in Shrewsbury |
| Cabinet Painting | Newly installed or existing cabinets needing a fresh, durable painted finish | Good option for stock or semi-custom installs where a custom color is desired without full custom pricing | $1,500 to $5,000 | Cabinet Painting in Shrewsbury |
Project Consultation
Kitchen cabinet installation in Shrewsbury runs $150 to $380 per linear foot installed in 2026. Cabinet grade, total linear footage, wall and floor condition, corner cabinet complexity, and whether electrical or plumbing relocation is involved all shift where a project lands in that range. A reliable figure can only be prepared after an in-home measuring visit and stud-mapping assessment.
On-site assessment and stud mapping before every written estimate
| Service | Estimate | What moves the price |
|---|---|---|
| Kitchen Cabinet Installation | $150 to $380 per linear ft | Cabinet grade (stock vs. semi-custom vs. full custom), total linear footage, wall and floor condition |
| Stock Cabinet Installation | $150 to $220 per linear ft | Fixed module widths, filler strip requirements, distributor lead time and delivery staging |
| Semi-Custom Cabinet Installation | $220 to $310 per linear ft | Extended size increments, brand lead time of 4 to 8 weeks, specialty cabinet types and finish options |
| Full Custom Cabinet Installation | $310 to $380+ per linear ft | Shop-built to exact dimensions, 8 to 10 week lead time, extensive scribing and trim work on site |
| Corner and Specialty Cabinets | Added to project total | Blind corners, lazy-Susan units, and tall pantry cabinets take longer to fit, level, and adjust |
| Crown Molding and Trim | Added to project total | Finish carpentry material and labor quoted separately based on linear footage and profile |
| Kitchen Cabinet Refacing | $8,000 to $20,000 | Number of doors and drawer fronts, material selection, condition of existing cabinet boxes |
| Countertop Installation | $3,500 to $12,000 | Material, linear footage, edge profile, and sink cutout complexity |
Every project is quoted after an on-site visit, contact us to schedule yours.
OUR PROCESS
Seven Pines Home Improvement runs every kitchen cabinet installation in Shrewsbury through a defined sequence. Uppers are set before base cabinets, every box is anchored into studs, and the job is not finished until door and drawer reveals are adjusted to a consistent gap across the full run.
Before any cabinet is touched, the crew maps stud locations across every wall in the cabinet run and snaps level lines for both upper and base cabinet positions. Wall plumb and floor level are checked and any shimming requirements are noted in advance.
Uppers go in first, held at height on a temporary ledger board anchored to studs. Each box is shimmed to within one-eighth of an inch over the run using a laser level line, then fastened into wall studs with cabinet screws, never into drywall alone.
Base cabinets are set level front-to-back and side-to-side using shims, then secured to studs and to one another. Filler strips and scribe molding are fitted to close gaps where walls are out of plumb. Gaps are scribed and fitted rather than caulked over, and toe kicks are installed to finish the base run.
Once all boxes are anchored, doors and drawer fronts are hung and adjusted for consistent reveals across the full run. Soft-close hinges and drawer slides are tested and tuned. The kitchen is then ready for countertop and backsplash installation, and the completed work is covered by Seven Pines Home Improvement's 3-year workmanship warranty.
PERMITS & COMPLIANCE
Cabinet installation in Shrewsbury does not require a building permit under the Town of Shrewsbury Building Inspector's guidelines, which list interior finish work including cabinets as exempt. If the project involves electrical or plumbing relocation, those trades trigger their own permits under 780 CMR, and Seven Pines flags that scope in writing before work begins.
Removing old cabinets and installing new ones is classified as interior finish work in Shrewsbury and does not require a building permit application or inspection under current Town guidelines.
Moving outlets, adding circuits for appliances, or relocating lighting within the cabinet run triggers a separate electrical permit under 780 CMR. We flag this scope before work begins so there are no surprises.
Shifting a sink drain or supply line as part of a layout change requires a plumbing permit and inspection. If your cabinet plan moves plumbing, we identify that in writing during the estimate stage.
Seven Pines holds HIC #205267 and coordinates any applicable permit requirements with the Town of Shrewsbury as part of the project plan, so trade permits are in place before affected work begins.
CABINET GRADES
The cabinet box you choose sets the floor for what your kitchen can look like and how long it holds up. Grade also determines lead time and how much site-fitting the installation requires. Stock lines ship fast and work well in straightforward layouts. Semi-custom and full custom lines open up sizing and finish options that stock modules cannot reach, and they demand tighter installation tolerances to show at their best.
Built in fixed width increments and shipped from distributor stock, often within days. Filler strips close the gaps where module widths do not land flush with the wall. Lines such as Hampton Bay and KraftMaid are common choices at this tier.
Ordered to a wider range of widths and heights than stock allows, with more finish, door style, and interior accessory options. Brands including Schrock, Bertch, KitchenCraft, and Wellborn typically carry 4 to 10 weeks of lead time before installation begins.
Built to the exact dimensions of the kitchen, with no fixed increments and no filler compromise. Lines such as Plain and Fancy or Crystal Cabinets fall here. Installation tolerances are tighter and the site-fitting work is more involved, with plywood box construction strongly preferred for moisture resistance.
Seven Pines assesses wall condition, layout complexity, and homeowner goals during the in-home measuring visit before recommending a grade. The goal is matching the cabinet to the kitchen, not to the widest margin.
Service Area
Seven Pines Home Improvement installs kitchen cabinets primarily across Shrewsbury and Worcester County, including Northborough, Grafton, Millis, and surrounding towns. We also work in MetroWest communities such as Sherborn, Dover, Concord, Needham, and Newton. Our base is on the Northside of Shrewsbury, near Rice Avenue, which keeps the team close to Worcester County project sites. For other locations, call (857) 247-4667 to confirm current service availability.
Before & After
Existing cabinets removed and walls inspected, then rebuilt with level, stud-anchored boxes, scribed fillers, and adjusted soft-close hardware throughout.
Helpful Information
Cabinet replacement is the right call when box structures are water-damaged, warped, or the layout no longer works for the kitchen. Refacing makes sense when the carcasses are solid and only the doors and drawer fronts are dated. We assess box condition during the in-home measuring visit and walk you through which path delivers the result you are after. See our cabinet refacing page for that option.
Cabinet installation in Shrewsbury does not require a building permit under the Town of Shrewsbury Building Inspector's guidelines, which list interior finish work including cabinets as exempt. If the project involves electrical or plumbing relocation, those trades trigger their own permits under 780 CMR, and we flag that scope in writing before work begins.
A quote covers in-home measuring and stud mapping, delivery staging, removal and disposal of existing cabinets, leveling and anchoring of new boxes, scribing and filler strips to fit true walls, and door and drawer hardware installation with reveal adjustment. Cabinet boxes and hardware, countertop work, and plumbing or electrical relocation are typically quoted separately.
We install stock lines such as Hampton Bay and KraftMaid, semi-custom brands including Schrock, Bertch, KitchenCraft, and Wellborn, and full custom lines such as Plain and Fancy or Crystal Cabinets. For box construction, we recommend plywood over particleboard wherever possible because plywood holds fasteners better and resists moisture in a MetroWest kitchen environment.
Every upper cabinet is anchored into wall studs or a continuous ledger board, never into drywall alone. We run a laser level line and shim each box to within one-eighth of an inch over the run before driving cabinet screws. Gaps between a cabinet and an out-of-plumb wall are scribed or filled with a filler strip rather than caulked over.
Clear the countertops and remove items stored inside the existing cabinets before the crew arrives. Appliances sitting in the cabinet run, such as a microwave or dishwasher, should be accessible for disconnection. We handle removal and disposal of the old cabinets as part of the installation scope, so no demo work is needed on your end before we arrive.
We stand behind our workmanship with a 3-year warranty. If an issue is caused by our work, we'll return promptly to inspect it and make it right at no additional cost during the warranty period. The warranty covers the installation itself; manufacturer defects in the cabinet boxes are handled through the cabinet brand's own warranty terms.
Kitchen cabinet installation from Seven Pines Home Improvement extends across MetroWest and Greater Boston, including Newton, Needham, Weston, Natick, Westwood, Brookline, Concord, Acton, Hopkinton, Holliston, Medfield, Marlborough, Northborough, Grafton, and surrounding communities. Get a Quote to confirm scheduling for your town.
Start a Conversation
If you are still comparing cabinet grades or figuring out what the demo will uncover behind your existing boxes, that is exactly the right time to reach out. We will come to the property, walk the kitchen with you, map the studs and the wall condition, and give you a written estimate, no obligation, no pressure. Seven Pines Home Improvement has been doing this work in Shrewsbury and across MetroWest since 2016, and we are registered under HIC #205267. Marcony Araujo and Romero Araujo are available to talk through any questions before you commit to anything. You can read more about how we work on our about page.
Our Shrewsbury Base
Seven Pines Home Improvement is based at 14 Rice Avenue in Shrewsbury and performs wide plank and pine floor refinishing across MetroWest, including Newton, Needham, Concord, Weston, and surrounding Worcester County communities.
Our refinishing crew travels to wide plank and pine floor projects throughout Shrewsbury, Newton, Needham, Concord, Weston, and surrounding MetroWest and Worcester County towns.
We are on the north side of Shrewsbury, just past Dean Park heading toward the Northborough line. Rice Avenue, not Rice Street.
Customer Reviews
Seven Pines holds a 5.0-star rating on Google across 9 reviews from homeowners in Shrewsbury and surrounding MetroWest communities.
9
Google
reviews
Seven Pines refinished our wide plank pine floors throughout the first floor. The sanding was done carefully and the finish came out perfectly flat with no sander marks. The crew was punctual, protected everything, and left the house clean every day.
Marcony and his team refinished our old pine floors and matched the stain beautifully to a repaired section. They finished ahead of schedule and the floors look better than they have in decades. Great workmanship from start to finish.
Seven Pines refinished the wide plank floors in our older colonial and handled the cupped boards carefully. They explained the moisture readings and finish options before starting. Professional, on time, and the results exceeded our expectations.
