Seven Pines general contractor vehicles at a residential project in Shrewsbury, MA
Primed and flush with the wall
Invisible once painted

Seven Pines Home Improvement

Drywall and plaster repair for MetroWest homes

Seven Pines Home Improvement provides drywall and plaster repair in Shrewsbury, MA, for single-family homes, typically running $800 to $5,000 and completed in anywhere from a same-day visit to a few days, depending on the damage. We handle general contractor work including small hole and crack patching, popped seam and nail pop repair, water-damage cutout and section replacement, and plaster skim coating.

We cut back failed wallboard or plaster to solid framing, re-patch, tape, run multiple coats of joint compound, sand, match the existing texture, and prime, so the repair disappears once the wall is painted. Homeowners call us for cracked plaster, holes, popped seams, and water-damaged ceilings. About 11 to 12 percent of Shrewsbury's homes predate the 1940s, which means real lath-and-plaster walls that crack and key-fail in ways modern drywall never does.

Backed by a 3-Year Workmanship Warranty. HIC #205267. This page covers what we repair, how we do it, what it costs, and how the two wall systems differ across MetroWest and Worcester County.

Registered HIC #205267
Workmanship 3-Year Workmanship Warranty
Project Planning Free Estimates
Local Experience Founded 2016

Drywall and Plaster Repair

What drywall and plaster repair covers, and what gets quoted separately

Seven Pines Home Improvement handles the full scope of drywall and plaster repair in Shrewsbury, MA, from small hole and crack patching to water-damage cutout and plaster skim coating across MetroWest.

General contractor inspecting framing and drywall during a home renovation in Shrewsbury, MA
Damage assessed to sound framing before any patch is closed up

Our drywall and plaster repair covers the damaged surface itself: cutting out failed material, patching, taping, multi-coat joint compound work, sanding, texture matching, and primer with spot paint. What sits outside that scope gets quoted on its own. Full-room repainting, wallpaper removal, mold remediation, fixing the leak behind water damage, insulation replacement, and any structural framing repair are each separate line items. Naming that line keeps the estimate honest and keeps a $900 patch from quietly becoming a much larger project.

Shrewsbury's housing stock makes this service particularly active. About 11 to 12 percent of the town's homes predate the 1940s, meaning real lath-and-plaster walls that crack and key-fail in ways modern drywall never does. The 1970s Colonials and raised ranches that make up the bulk of the remaining stock are now carrying 40- to 50-year-old wallboard that has cycled through enough New England freeze-thaw seasons to pop seams, telegraph nail heads, and take moisture in wall cavities. You can see the full list of services we provide or get the detail on our general contractor work.

The Scope of the Work Small hole and crack patching, popped seam and nail pop repair, water-damage cutout and section replacement, and plaster skim coating and crack stabilization.

Repair Types We Handle

The four drywall and plaster repairs we handle

Sunroom addition with a stained shiplap wall, exposed brick chimney and new plank floor Small Holes and Cracks

Small Hole and Crack Patching

Doorknob dents, nail holes, and hairline cracks are the most common call we get. For a small hole we set an adhesive-backed aluminum patch over the opening, then mud over it in coats. Hairline cracks get cut open, filled, and feathered so they do not telegraph back through once the wall is painted. Most small patches finish in a one-to-two hour visit.

Dining room painted deep green above white wainscoting, with crown moulding and oak flooring Seams and Nail Pops

Popped Seam and Nail Pop Repair

A popped seam is a taped joint that has split, and a nail pop is a fastener head pushing a small bump through the surface. Both show up as framing moves with the seasons. We reset or re-screw the fastener below the surface without tearing the paper face, re-tape the seam, and run fresh coats of compound over it rather than smearing filler on top, which only pops again.

Basement Remodeling in Shrewsbury Water Damage

Water-Damage Cutout and Section Replacement

When a ceiling or wall has taken water, the drywall loses structure and the paper face feeds mold. We cut the compromised section back to sound framing, confirm framing reads under 1% moisture before closing anything up, install a new patch piece, then tape and finish it to match the surrounding surface. The source of the leak must be fixed first; that is a separate repair.

Attic Conversion in Shrewsbury Plaster Walls

Plaster Skim Coating and Crack Stabilization

Older MetroWest homes have plaster over wood lath, and when the plaster separates from the lath it cracks in long, spidering lines. We stabilize the loose field, then skim coat, a thin full-surface layer of plaster or compound troweled over the wall to bring it back flat and smooth. It restores the wall without ripping out original plaster you cannot easily match.

Paint and Carpentry in Shrewsbury What Is Included

What the Repair Quote Covers

Every drywall and plaster repair quote from Seven Pines Home Improvement includes damage assessment, cutting and patching, taping, two to three coats of joint compound, sanding, texture matching, and primer or spot paint limited to the repaired area. Full-room repainting, wallpaper removal, mold remediation, source-of-leak repair, insulation replacement, and structural framing repairs are each quoted separately.

Paint and Carpentry in Shrewsbury
Dining room with white raised-panel wainscoting, crown moulding and a refinished oak floor Finish and Texture

Texture Matching and Primer

A structurally sound patch that does not match the surrounding texture is still a visible patch. After sanding, we replicate the existing finish, whether that is smooth Level 5, a light orange peel, or a heavier knockdown, so the repair disappears once the wall is painted. Every repair is primed before handoff, giving you a surface that is flush with the surrounding wall and ready for a paint finish.

Wall Systems

Drywall versus plaster: which repair method applies to your walls

Knock on the wall: a hollow, drummy sound usually means drywall, and a dense, solid thud usually means plaster. That one test tells us which repair method your walls need. The two systems fail differently and are repaired differently, and using the wrong method on either one produces a patch that fails again.

How Drywall Fails

Drywall damage is mechanical: holes, dents, popped seams, and water swelling. The gypsum panel loses rigidity when wet and the paper face delaminates. The fix is to cut back to sound framing, patch, tape, and feather compound out past the joint in multiple coats.

How Plaster Fails

Plaster fails at the bond. The keys, the plaster that squeezed through the lath gaps and locked the wall, break off over decades, and whole sections go loose and crack. A dab of joint compound on top does not fix it. The field needs stabilization and usually a skim coat across the surface.

Identifying Your Wall System

Shrewsbury's 1970s-and-later homes are almost all drywall. The pre-1940s stock is lath-and-plaster. Plenty of homes are both, a 1920s house with a 1990s addition has both systems under one roof. We match the repair to whichever wall we are standing in front of.

Drywall Repair Method

Cut-and-patch with a new drywall section or an aluminum mesh patch, followed by paper tape on flat joints, three coats of joint compound, sanding, texture matching, and primer. Seams are feathered twelve to sixteen inches beyond the joint.

Plaster Repair Method

Stabilize the loose field, bridge cracks, and apply a skim coat of veneer plaster or compound troweled over the surface to restore a flat plane. For larger losses we install blueboard and finish with veneer plaster, keeping the wall system consistent with the original construction.

Blueboard and Veneer Plaster

Some newer MetroWest homes and remodels were finished in veneer plaster over blueboard rather than tape-and-mud drywall. Surface chips and impact cracks in that system get a veneer plaster patch over blueboard rather than a joint compound fill, so the sheen and hardness of the repair match the field.

What drywall and plaster repair costs here

ScopeTypical rangeWhat moves the number
Small hole and crack patching (under 2 sq ft) $800 to $1,200 Number of patches, location on wall or ceiling, and whether texture matching is required
Popped seam and nail pop repair $800 to $1,500 Number of pops and seams, how widely they run, and whether re-taping is needed across a full wall section
Water-damage cutout and section replacement $1,200 to $3,500 Size of the compromised section, ceiling versus wall, and whether moisture in the framing extends the dry-out period
Plaster skim coating (single room) $2,000 to $5,000 Room size, depth of plaster loss, whether blueboard substrate is needed, and number of coats to restore a flat plane
Multi-room or whole-floor repair $3,000 to $5,000 Total patch count, mix of drywall and plaster systems, and compound cure time between coats
Full-room repainting Quoted separately Not included in the repair scope. Primer and spot paint at the patch area are included; full walls and ceilings are a separate line

Market ranges for Worcester County and MetroWest, confirmed by the owners October 2026. They are not a quote. Every repair is priced after an on-site assessment, and the written scope is what the price attaches to.

What every repair gets

Every drywall and plaster repair from Seven Pines Home Improvement follows a minimum three-coat process: a tape coat, a fill coat, and a finish coat, each dried fully before the next is applied. We take moisture readings on framing before closing up any water-damaged area, and we will not patch over framing that reads above 1% moisture. Work is carried out under Massachusetts Home Improvement Contractor registration 205267, which you can verify against the state register before signing anything, and is backed by a 3-year workmanship warranty.

Compare Your Options

Which Repair Method Applies to Your Walls?

Drywall and plaster fail in different ways and get repaired by different methods. The wall system, the type of damage, and whether your home predates the 1940s all determine where we start. Use this table to match your situation to the right repair approach, then follow the link to that service for deeper detail.

Swipe sideways to view the full comparison table.

Repair TypeBest forMetroWest contextLearn more
Small Hole and Crack PatchingHomeowners with doorknob dents, nail holes, or hairline cracks in otherwise sound wallsMost common call; typically a same-day visit under two hours; no permit requiredPaint and Carpentry in Shrewsbury
Popped Seam and Nail Pop RepairWalls showing a ridge along a taped joint or a small bump where a fastener has worked looseSeasonal framing movement in Central MA causes repeat pops if only filler is appliedFinish Carpentry in Shrewsbury
Water-Damage Cutout and Section ReplacementCeilings or walls that absorbed leak water and lost structural integrity in the panelFraming must read under 1% moisture before closure; source-of-leak fix is quoted separatelyHome Renovations in Shrewsbury
Plaster Skim Coating and Crack StabilizationPre-1940s Shrewsbury homes with lath-and-plaster walls showing long spidering cracks or delaminationPreserves original plaster mass; veneer plaster over blueboard matches the existing wall systemHome Renovations in Shrewsbury
Drywall Panel ReplacementWater-soaked or delaminated panels where a flush patch is not achievablePost-1960s Shrewsbury homes are almost all drywall; moisture-resistant greenboard used in kitchens and bathsBasement Remodeling in Shrewsbury
Texture Matching and PrimeAny finished repair where the surrounding wall carries a knockdown, orange peel, or skip-trowel textureTexture mismatch is the most visible sign of a poor repair; Seven Pines feathers seams 12 to 16 inches outInterior Painting in Shrewsbury

2026 Project Pricing

How Much Does Drywall or Plaster Repair Cost in MetroWest?

Drywall and plaster repair in MetroWest typically runs $800 to $5,000, with full-room repainting quoted separately. The ranges below reflect what Seven Pines Home Improvement has quoted for real repair projects across Shrewsbury and the surrounding MetroWest area in 2026. The primary cost drivers are the number and size of patches, whether the substrate is drywall or plaster, and how closely an existing texture must be matched.

General contractor project estimate in Shrewsbury, MA On-site assessment before every written estimate

Swipe sideways to view the full pricing table.

ServiceTypical range in MetroWest (2026)What moves the price
Small Hole and Crack Patching$800 to $1,500Number of patches, depth of damage, how closely the existing texture must be matched
Popped Seam and Nail Pop Repair$800 to $2,000Length of failed seam, number of fastener pops, extent of surrounding surface damage
Water-Damage Cutout and Section Replacement$1,200 to $4,000Size of affected section, moisture readings on framing, texture matching complexity
Plaster Skim Coating and Crack Stabilization$1,500 to $5,000Square footage of field, extent of key failure, number of coats needed to restore flat surface
Full-Room Drywall and Plaster Repair$800 to $5,000. Repainting the full room is quoted separately.Number and size of the patches, plaster against drywall, how closely an existing texture has to be matched
Blueboard and Veneer Plaster Patch$900 to $3,000Patch area, veneer plaster finish complexity, feathering into existing veneer coat
Texture Matching Only$800 to $2,000Texture profile complexity, wall area requiring matching, sheen and finish level required
Multi-Room or Whole-Floor Repair$2,500 to $5,000Total patch count, mix of drywall and plaster substrates, access and staging conditions
Ceiling Water-Damage Repair$1,000 to $4,500Span of damaged ceiling, framing moisture levels, texture and finish complexity

Every repair is quoted after an on-site assessment, contact us to schedule yours at no charge.

General contractor inspecting a residential renovation in Shrewsbury, MA

Pricing Guide

How much does drywall or plaster repair cost in MetroWest?

Drywall and plaster repair in MetroWest typically runs $800 to $5,000, depending on the number and size of patches, whether the substrate is drywall or plaster, and how closely an existing texture must be matched. Full-room repainting is quoted separately. Seven Pines Home Improvement confirms the figure after assessing the space. Contact us to Get a Quote.

Number and Size of Patches

A single doorknob hole under two square feet is a one-to-two hour visit. A water-damaged ceiling section or a run of popped seams across multiple rooms is a multi-day job with compound drying between coats. The estimate accounts for both the area and the number of separate repair locations, because mobilizing to five different walls costs more than fixing five holes on the same wall.

Drywall Versus Plaster Substrate

Patching drywall and patching lath-and-plaster are not the same job. Plaster repair often means stabilizing a loose field before any skim coating begins, which adds time and material cost over a straightforward cut-and-patch on a gypsum panel. Older Shrewsbury homes with original plaster walls should expect the higher end of the range when more than a small crack is involved.

Texture Matching Complexity

A smooth wall that takes a flat mud finish is the easiest surface to blend. Skip trowel, orange peel, knockdown, and any hand-applied plaster texture each require additional time to match because the pattern has to be reproduced by hand, not rolled on. We do not prime and hand off a repair that reads as a patch under raking light, texture matching is part of the job, not an add-on.

What Sits Outside the Repair Quote

Full-room repainting, wallpaper removal, mold remediation, source-of-leak repair, insulation replacement, and structural framing repairs are each quoted separately. The repair scope covers damage assessment, cutting and patching, taping, compound coats, sanding, texture matching, and primer or spot paint limited to the repaired area. Naming that line at the estimate stage keeps the final invoice from moving.

Seven Pines Home Improvement service area in Worcester County, MA

Service Area

Where we do drywall and plaster repair across MetroWest

Seven Pines Home Improvement is based in Shrewsbury and handles drywall and plaster repair across Worcester County and the MetroWest communities. Our regular project area includes Shrewsbury, Northborough, Grafton, and Millis. We also work regularly in Newton, Needham, Weston, Dover, Concord, Sherborn, Acton, Somerville, and Boston. The wall systems differ across these markets. Homes closer to Shrewsbury tend to be 1970s-and-later drywall construction, while older MetroWest towns have a much higher share of lath-and-plaster walls that need stabilization and skim coating rather than a standard cut-and-patch. We handle both. Call (857) 247-4667 or visit the contact page if your town is not listed and you want to confirm coverage.

Before & After

A Drywall Repair, Before and After

The same wall: damaged drywall cut back to framing, then patched, taped, finished with three coats of compound, sanded, and primed flush with the surrounding surface.

Room with patched walls and bare subfloor before a Seven Pines interior renovation
Before
The same room after renovation, with painted walls, new trim and hardwood flooring
After

Recent Project

Plaster Skim Coating and Crack Stabilization

A pre-1940s Shrewsbury home with failing lath-and-plaster walls. Loose plaster was stabilized, long cracks were bridged with fiberglass mesh tape, and a full skim coat was troweled over each wall surface and brought back flat and smooth before priming.

Finished built-in window seat with two panelled storage compartments under a window
Custom built-in window seat with the hinged storage lids open, painted white
Built-in window seat with panelled fronts under a pair of bay windows
Finish carpentry on a panelled half wall and column between two rooms, painted white
Hallway with white shiplap wainscoting, dark painted walls above and a plank floor
Room painted deep green with white crown moulding, wainscoting and window casing

Helpful Information

Questions Homeowners Ask About Drywall and Plaster Repair in MetroWest

Should I patch drywall or replace the whole panel?

Patch when damage is localized: a single hole, a popped seam, or a crack confined to one area. We replace a full panel when the board is water-soaked, the paper face is delaminated across a wide section, or the framing behind it has shifted enough to make a flush patch impossible. A written estimate from Seven Pines Home Improvement confirms which path applies.

What types of drywall and plaster damage can you repair?

We handle small hole and crack patching, popped seam and nail pop repair, water-damage cutout and section replacement, and plaster wall and ceiling skim coating with crack stabilization. Older MetroWest homes with lath-and-plaster walls get a veneer plaster finish over blueboard rather than a drywall patch, keeping the wall system consistent with the original construction.

What is not included in a drywall or plaster repair quote?

Full-room repainting, wallpaper removal, mold remediation, source-of-leak repair, insulation replacement, and structural framing repairs are each quoted separately. The repair scope covers damage assessment, cutting and patching, taping, compound coats, sanding, texture matching, and primer or spot paint limited to the repaired area.

How much does drywall or plaster repair cost in MetroWest?

Drywall and plaster repair in MetroWest typically runs $800 to $5,000, depending on the number and size of patches, whether the substrate is drywall or plaster, and how closely an existing texture must be matched. Full-room repainting is quoted separately. Seven Pines Home Improvement confirms the figure after assessing the space. Contact us to Get a Quote.

Does a drywall or plaster repair in Shrewsbury require a building permit?

Standard drywall and plaster repair in Shrewsbury falls under interior finish work, which the Town of Shrewsbury exempts from a building permit under 780 CMR. Work that touches fire-rated assemblies or structural framing may require a permit; we identify those conditions during the damage assessment and advise you before any work begins.

How long does drywall or plaster repair take?

Small patches under two square feet finish in a one-to-two hour visit. Holes and popped seams in the two-to-ten square foot range run a half day to a full day including dry time between coats. Large multi-room repairs or plaster skim coating take two to five days to allow compound to cure fully. Seven Pines Home Improvement confirms the schedule after inspecting the space.

How do you make a repaired wall invisible after painting?

Every repair goes through a minimum three-coat process: a tape coat, a fill coat, and a finish coat, each dried fully before the next is applied. Seams are feathered twelve to sixteen inches beyond the joint so the transition disappears under paint. We then match the existing texture and prime, handing off a surface flush with the surrounding wall and ready for a paint finish.

What should I do before the crew arrives for a plaster or drywall repair?

Clear furniture and wall art from the repair area and give the crew a clear path to the damaged surface. If the damage followed a plumbing leak, have the source fixed beforehand. Seven Pines Home Improvement takes moisture readings on the framing and will not close up any wall where framing reads above one percent moisture, because patching over damp material causes a repeat repair.

Start a Conversation

Ready to Talk Through Your Drywall or Plaster Repair?

Not sure whether your walls need a patch, a section replacement, or a full skim coat? That is exactly where we start. Reach out and we will assess the damage, walk through the right scope, and put a detailed written estimate in your hands, no pressure, no guesswork. Most drywall and plaster repair projects in MetroWest run $800 to $5,000. Seven Pines Home Improvement holds HIC #205267 and backs every project with a 3-Year Workmanship Warranty. Marcony Araujo and Romero Araujo are available to talk through your project directly.

Our Shrewsbury Base

Where We Are Based

Seven Pines Home Improvement is based at 14 Rice Avenue in Shrewsbury and provides hardwood floor repair across Worcester County and the wider MetroWest area.

Seven Pines Home Improvement
14 Rice Avenue
Shrewsbury, MA 01545
(857) 247-4667
office@sevenpinescorp.com
Business Hours
Monday to Friday8 am, 6 pm
Saturday8 am, 6 pm
SundayClosed
Serving MetroWest Homeowners

Our crew travels to hardwood floor repair projects throughout Shrewsbury, Worcester County, and surrounding MetroWest communities including Northborough, Marlborough, Grafton, and Hopkinton.

We are on the north side of Shrewsbury, just past Dean Park heading toward the Northborough line. Rice Avenue, not Rice Street.

Customer Reviews

What MetroWest Homeowners Say

Seven Pines holds a 5.0-star rating on Google across 10 reviews from homeowners in Shrewsbury and surrounding MetroWest communities.

Google logo 5.0 9 Google reviews

Seven Pines repaired several damaged boards near our kitchen after a slow dishwasher leak. Marcony and the crew matched the stain on our 1980s oak floor better than I expected. You can barely see where the new boards are.

Ping H.
via Google

We had a section of hallway floor that was cupping and squeaking after a pipe issue. Seven Pines checked the subfloor, replaced the bad boards, and blended the finish into the rest of the floor. Professional and finished ahead of schedule.

Kristofer P.
via Google

Romero and the team replaced gouged boards in our living room and matched the stain on our aged maple floor. They were on time, thorough with the moisture check, and left the space cleaner than they found it.

Gautham P.
via Google
Read all 10 reviews on Google